Tile laying systems

Tile adhesives

SYSTEM STRUCTURE DIAGRAM

Ceramic tiles are widely used as a functional decorative material, it comes in different shapes and sizes, unit weight and density. differences, and how to paste this durable material well has always been a concern. The advent of tile adhesives has to some extent ensured the reliability of the bonding project, and the right cellulose ethers can ensure that the different types of tile Smooth construction on different substrates.

9fec75e819c8463e78e134aecceb635

The requirements of the tile binder can be met by the addition of cellulose ether products. The mortar can be easily combed and troweled; good water retention reduces the amount of water in the mortar that is absorbed by the substrate and tiles, and reduces the amount of water in the mortar that is absorbed by the substrate and tiles. retained in the binder as much as possible, thereby allowing the mortar coating to remain bonded over a long period of time, with significantly longer open times. The right viscosity gives the mortar consistency and improves the consistency of the mortar to the tile and substrate. Wetting ability to improve the adhesion of the mortar, especially for high ash ratio formulations; special modified cellulose ethers can ensure that the construction of tile It will not slide, especially for heavy tiles and marbles. Choosing the right cellulose ethers allows the tile binder to achieve higher bond strength, providing high-temperature adaptability at higher ambient temperatures. In this case, it also gives the tile binder a long enough open and adjustable time.

3e9eb819-e343-47be-9cba-d84ff529d5d1

Tile Grouts

SYSTEM STRUCTURE DIAGRAM

As an important role in the tile pasting project, joint sealant not only improves the overall effect of tile bonding project or contrast effect. Important role, but also in improving the impermeability of the wall. Rich and uniform color is the basic requirement for a number of jointing agent products, which should also have low shrinkage, low porosity, easy operation and high early strength. properties. Cellulose ethers are the most suitable admixtures for these properties.

It can improve the cohesion of the mortar and the adhesion to the base material without sagging, and it has good water retention capacity and low incursion, which can hydrate the mortar fully and avoid cracking.

New composite self-insulating blocks

THE SYSTEM SIGNAL STRENGTH IS CALCULATED

The new composite self-insulating blocks are composed of main body blocks, outer thermal insulation layer, thermal insulation core material, protective layer and thermal insulation connection column pin. Between the inner and outer walls of the main body block, between the main body block and the outer protective layer, is through "L-shaped T-point connecting ribs" and "through insulation layer". The "point pin" is combined as a whole, and steel wires are installed in the pin. Under the premise of ensuring safety, it can minimize the cold bridge effect and has excellent thermal insulation performance.

1、Excellent thermal insulation performance and cost performance ratio.

2, greatly reduce the generation of wall cracks and fissures, significantly improve the quality of the project

3、Adopt embedded masonry, significantly increase masonry strength

aef32f12-7b70-42c1-a65a-68ac03797961
cb64dda7-91c3-4947-b408-48b528d4c0a3

  • twitter
  • linkedin
  • facebook
  • youtube